Product was successfully added to your shopping cart.
  • R.A.P.T. Add-On (BLK)
  • R.A.P.T. Add-On (ORG)
  • R.A.P.T. Add-On (GRN)

RAPT Add-On collar

Quick Overview

Add-On and replacement collar unit with Black, Orange, or Green belt for the R.A.P.T. 1400

Regular Price: $129.99

Special Price $119.99

Availability: In stock

* Required Fields

Regular Price: $129.99

Special Price $119.99

Details

  • Collar Unit - 2.25 in. x 1.5 in. x 1.25 in., 4.7 oz. (with belt)

Additional Information

User Guide

R.A.P.T. 1400 with SmartLED

1
R.A.P.T. 1400 Add-On Collar Black is rated 3.3 out of 5 by 3.
Rated 5 out of 5 by from My Great Piranees has a game...if he gets away he keeps going until brought back. The dog hadn't been off leash in over a year because we live on the edge of open range. I felt really bad that he couldn't really experience any freedom whatsoever. It would cost thousands to fence the yard on the place This collar changed our lives. I can now let him run with the other dogs and not worry that he'll keep going. Only had to use the shock once and the vibration three times the first day and now I don't even have to turn the collar on unless there are people around. That's after ONE DAY of use! Seldom have to think about using anything but the vibration button.
Date published: 2017-02-20
Rated 1 out of 5 by from Third collar bought. Doesn't work Just received my third collar. Only worked one day. For $119.00 for a replacement. I would think the manufacturer would back up the product. Need to take it off the shelf. Worst collar ever
Date published: 2018-11-24
Rated 4 out of 5 by from GOOD ALL AROUND DEVICE I BOUGHT ANOTHER COLLAR TO USE AS A TWO DOG SYSTEM. THEN NOTICED MY ORIGINAL COLLAR NO LONGER WORKED. BOUGHT ANOTHER.
Date published: 2017-10-29
  • y_2019, m_12, d_14, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_712548012017, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_dtsystems
1

I have a new DT Systems RAPT 1400 system. I bought an additional add on collar. How do I program the transmitter to function the add on collar if the first collar is set up for collar #1?

Asked by: coachjohn7
Hello, Collar programming instructions are below: PROGRAMMING THE COLLAR When adding an “Add-On” collar, the collar will need to be programmed to the transmitter. If your current collar unit is not responding to the transmitter, it may also need to be reprogrammed to the transmitter. 1. Select the desired Collar Selecting Switch position on the transmitter. 2. Hold the Transmitter Magnet Indicator (white dot) directly against the Magnetic Activation Switch (small bump) on the right side of the Collar Receiver. 3. The SmartLED light inside the Collar Receiver will light up solid for about 1 second, followed by 6 flashes. You must keep the Transmitter next to the Collar Receiver during this time. 4. Continue to hold the Transmitter against the Collar Receiver until the SmartLED light stays on solid. The Collar Receiver is now in the Code Running Mode (the SmartLED light will stay lit for approximately 8 seconds while it is in this mode). 5. Remove the Transmitter from the Collar Receiver and press the Rapid Access and CONT buttons simultaneously while it is in the Code Running Mode. 6. When the SmartLED blinks 3 times, the Collar ID is programmed and the Collar Receiver is now ON. NOTE – Do not move the Transmitter Magnet ON/OFF switch from the Collar Receiver Magnetic Activation Switch until after the SmartLED stops flashing and stays on solid or the Collar Receiver will not go into the Code Running Mode. You must press the NICK and CONT buttons simultaneously while the SmartLED is lit solid. Hope this helps.
Answered by: MKT
Date published: 2019-10-14

How do you connect a 1400 collar to the 1450 remote? 

Asked by: Mav123
Hello, Please see instructions below: PROGRAMMING THE COLLAR When adding an “Add-On” collar, the collar will need to be programmed to the transmitter. If your current collar unit is not responding to the transmitter, it may also need to be reprogrammed to the transmitter. 1. Select the desired Collar Selecting Switch position on the transmitter. 2. Hold the Transmitter Magnet Indicator (white dot) directly against the Magnetic Activation Switch (small bump) on the right side of the Collar Receiver. 3. The SmartLED light inside the Collar Receiver will light up solid for about 1 second, followed by 6 flashes. You must keep the Transmitter next to the Collar Receiver during this time. 4. Continue to hold the Transmitter against the Collar Receiver until the SmartLED light stays on solid. The Collar Receiver is now in the Code Running Mode (the SmartLED light will stay lit for approximately 8 seconds while it is in this mode). 5. Remove the Transmitter from the Collar Receiver and press the Rapid Access and CONT buttons simultaneously while it is in the Code Running Mode. 6. When the SmartLED blinks 3 times, the Collar ID is programmed and the Collar Receiver is now ON. NOTE – Do not move the Transmitter Magnet ON/OFF switch from the Collar Receiver Magnetic Activation Switch until after the SmartLED stops flashing and stays on solid or the Collar Receiver will not go into the Code Running Mode. You must press the NICK and CONT buttons simultaneously while the SmartLED is lit solid. Hope this helps.
Answered by: DT Systems
Date published: 2019-02-07

I have to be missing something ? It doesn't function I have the collar and the remote need to know what I'm missing I have no way to charge it.

Asked by: Dalton Daze
Hello, The remote takes a 9v battery in order to function. The battery needs to be fresh and new. The collar must be charged (it has rechargeable batteries). The collar needs a specific charger to charge the batteries, and I have included a link here so you can purchase the charger from our website if you need to: https://dtsystems.com/products/parts-accessories/remote-trainer-parts/rapt-1400-parts/115vac-new-battery-charger-usa.html I have also included a link to the Owner's Manual here so you can see the procedure for charging and installing batteries. https://dtsystems.com/media/wysiwyg/userguides/RAPT_SmartLED_Manual.pdf Hope this helps.
Answered by: DT Systems
Date published: 2018-06-04

Do you make a small dog collar say for example for a dog weighing 10 pounds?

Asked by: Razor
Hello, The Canine Coach 360 is our smallest and lightest collar. The collar strap is fully adjustable from about 7" to 27" so for dogs that weigh approx. 5-125lbs. The information on that collar can be found on our website at this link: https://dtsystems.com/products/remote-trainers/canine-coach-360-e-collar-trainer-13/canine-coach-360-e-collar-trainer.html Hope this helps.
Answered by: DT Systems
Date published: 2018-02-13

Are there different sizes - i.e. for a 10 lb dog?

Asked by: Razor
Hello, Most of our collars are fully adjustable from a range of about 7" to 27" so they will fit small dogs all the way up to very large dogs. Hope this helps.
Answered by: DT Systems
Date published: 2018-02-13

Can the rapt 1400 collar be used with the rapt 1450 remote?

Asked by: NateC
Hello, Yes, a RAPT 1400 collar can be programmed (added) to the RAPT 1450 remote. However, note, you will not have the "Beeper" function as of course the RAPT 1400 collar does not have a beeper unit. Hope this helps.
Answered by: DT Systems
Date published: 2017-09-25

Can an add on collar from the IDT collar be used with the RAPT system or vice versus?

Asked by: Sara
Hello, No, the Micro iDT and the RAPT are independent and unique to their individual controllers. Hope this helps.
Answered by: DT Systems
Date published: 2017-06-05

Have you got the model min e2090 for small dogs  Thanks 

Asked by: Trish
Hello, We do have an ultra min-e 2090 No Bark collar, and if that is what you are referring to, I have included a link to that product below: https://dtsystems.com/products/no-bark-trainers/ultra-2090.html Hope this helps.
Answered by: DT Systems
Date published: 2016-10-06
  • y_2019, m_12, d_14, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_712548012017, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_dtsystems

Related Products