ANTENNA 1″
Transmitter antenna: Standard for the DD700 and the RAPT 1450 Upland, will also fit the Micro-iDT, Bird Launcher transmitter, RAPT 1400, H20, Master Retriever 1100 (standard), RH PRO, SPOT, PA-300, RT 500, CC 360. Provides a more compact shorter 1" antenna option.
[porto_block name=""]
$24.00
ANTENNA 2.5″
Standard Antenna (2 1/2") for the:
Micro-iDT, SPOT, and Bird Launcher transmitters as well as for the RAPT 1400 and 1450 lines & the PA 300, RH 360 and CC 360.
Will also fit other DT models, H20, SPOT, MR 1100, RAPT series.
[porto_block name=""]
$19.00
BATTERY (COLLAR)
This is a rechargeable NiMH battery that replaces the collar battery in the IDT Series, RAPT 1400 Series, RH PRO 1000, and the Master Retriever 1100 (4.8v 170m).
[porto_block name=""]
$26.00
BATTERY COVER TX RHPRO
Transmitter BATTERY COVER fits the following models
RH PRO 1000/MR 1100/K9 700
[porto_block name="dt-related-products-micro-idt"]
$5.00
CHARGER (AUTO)
Standard Battery Charger Auto
IMPORTANT: Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). All series require a special single-jack, double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$20.00
CHARGER (EURO)
220VAC European Battery Charger (USA) for:
IDT Series / RAPT Series / 1125DT
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). IDT/RAPT/1125 require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collars charging receptacle (sold separately).
NOTE: This charger is compatible with units that came with the same charger (Yellow Ends). If your unit came with a completely black charger, your splitter cables will not work with this unit.
[porto_block name="dt-related-products-micro-idt"]
$30.00
CHARGER (USA) 12V
12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).
NOTE: This charger is compatible with units that came with the same charger (Yellow Ends). If your unit came with a completely black charger, your splitter cables will not work with this unit.
[porto_block name=""]
$35.00
CHARGING PORT COVER RX
BATTERY CHARGING TERMINAL COVER for COLLAR box. Fits the below models:
RAPT 1400 series/RHPRO/CC360/RH 360
NOTE: May fit others depending upon application.
[porto_block name="dt-related-products-micro-idt"]
$2.00
COLLAR BELT
Replaceable Collar Belt:
COLLAR BELT IDT/RAPT/RHPRO/MR1100
$31.00
COLLAR BELT 30”
Replaceable Collar Belt:
COLLAR BELT 30'' IDT/RAPT/MR1100/RHPRO
NOTE: Standard collar is around 25", this is a longer 30" replacement collar.
$31.00
CONTACTS 3/8″ 1/2″ 3/4″
Replacement Contact Points:
CONTACT Points, 1 set of 2 that fits: IDT/RAPT/RT/SPOT/No Barks-2090-Bark BOSS-1145-1125/RHPRO/CC360
** NOTE: Washers needed for these contacts
** STANDARD contacts are 1/2" non insulated (these are slightly shorter than the insulated contacts).
$8.00
CONTACTS INSULATED FEMALE
Replacement Insulated Contacts, 1 set of 2 for:
IDT/ MR1100/ RAPT/ RT/ SPOT/ RH PRO/ CC360/1125DT/ K9 700
[porto_block name="dt-related-products-micro-idt"]
$8.00
DUMMY COLLAR
This is a non-working dummy collar for the RAPT.
NOTE: Dummy unit only, NON-Working.
[porto_block name="dt-related-products-micro-idt"]
$30.00
JACK CABLE (BLACK)
NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger
Splitter Cable for:
iDT Series / SPT 7000 Series / RAPT 1400/ RH PRO 1000/ SPOT Series.
Double-jack and triple-jack splitter cable allows simultaneous charging of transmitter and collar unit(s), specifically for the iDT Series / SPT7000/ RAPT1400/ RH Pro/ SPOT Series ONLY.
CHARGER SOLD SEPARATELY.
**PLEASE NOTE: There are 2 different types of splitter cables. Please pay attention to the color on the output end of your charger (Yellow or Black). This splitter will only fit on black end chargers.
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). Units require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collars charging receptacle (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$12.00
JACK CABLE (YELLOW)
NOTE: This product is needed to charge multiple collars in addition to the plug in Charger
Splitter Cable for:
DD700 / MICRO iDT / RAPT1400 / MR1100 / K9700 / RH Pro Series
Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the DD700 / MICRO iDT/ RAPT1400/ MR1100/ K9700/ RH Pro Series ONLY.
CHARGER SOLD SEPARATELY.
**PLEASE NOTE: There are 2 different types of splitter cables. Please pay attention to the color on the output end of your charger (Yellow or Black). This splitter will only fit on yellow end chargers.
IMPORTANT: Double-jack cables required for simultaneous charging multiple collar unit(s).
$12.00
LANYARD
Neck LANYARD Fits most DT Systems handheld remote/transmitters:
IDT/BTB/BL/RT/SPOT/PA/RDL/RAPT/CC360
[porto_block name="dt-related-products-micro-idt"]
$5.00
MAGNET (SMALL)
MAGNET 2090
Magnet clip to turn the 2090 off and on and to set/program the training modes
[porto_block name="dt-related-products-micro-idt"]
$2.00
MAGNET WITH KEYRING
MAGNET WITH KEYRING
Magnet with to turn On/Off any DT Systems product with magnetic off and on and to set/program the training modes on applicable models.
[porto_block name="dt-related-products-micro-idt"]
$3.00
TEST LIGHT
TEST LIGHT for the following units:
RAPT/IDT/SPOT/RT/PA/RHPRO/CC360
$5.00