ANTENNA 2″ / 4″ / 6″
Transmitter Antenna for:
- H2O Series
- SPT Series
- EZT Series
- EDT Series
- ST Series
Will also fit other DT models, Micro iDT, SPOT, MR 1100, RAPT series.
[porto_block name=""]
$19.00
BATTERY (COLLAR)
Replacement rechargeable NiMH collar battery for the H2O, RAPT 1450, SPT2400, BTB, EDT, EZT, ST PRO, CDT, RH, RH2 units.
[porto_block name=""]
$31.00
CARRYING CASE
CARRYING CASE ST
Plastic Carrying case with handle and clip latches for ST
[porto_block name="dt-related-products-micro-idt"]
$25.00
CARRYING CASE CLIP
CARRYING CASE CLIP
[porto_block name="dt-related-products-micro-idt"]
$2.00
CHARGER (AUTO)
Standard Battery Charger Auto
IMPORTANT: Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). All series require a special single-jack, double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$20.00
CHARGER (EURO)
12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).
NOTE: This charger is compatible with units that came with the same charger (Yellow Ends). If your unit came with a completely
$30.00
CHARGER (USA)
115VAC Standard Battery Charger (USA) for:
H2O Series / RAPT 1450 series / EZT Series / EDT Series / RH Series / CDT Series/ 77DT Series / 400DT Series
IMPORTANT: Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). The H2O series require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately).
NOTE: If the charger that came with your unit had a yellow tip (the output end), this charger will not be compatible with your unit and cables. This charger is for units that came with completely black chargers. Please click here to be directed to the correct charger.
[porto_block name="dt-related-products-micro-idt"]
$30.00
CHARGER (USA) 12V
12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).
NOTE: This charger is compatible with units that came with the same charger (Yellow Ends). If your unit came with a completely black charger, your splitter cables will not work with this unit.
[porto_block name=""]
$35.00
CHARGING PORT COVER RX
BATTERY CHARGING TERMINAL COVER for COLLAR box. Fits the below models:
H2O/EDT/EZT/ST/SPT2400/CDT/RH/RH2/RAPT1450
NOTE: May fit others depending upon application.
[porto_block name="dt-related-products-micro-idt"]
$2.00
CHARGING PORT COVER TX
BATTERY CHARGING TERMINAL COVER for Transmitter/Remote. Fits the below models:
ST Models
NOTE: May fit others depending upon application.
[porto_block name="dt-related-products-micro-idt"]
$2.00
COLLAR BELT
Replaceable Collar Belt:
COLLAR BELT H2O/EDT/EZT/ST/SPT 2400/CDT/RH/RH2
$31.00
COLLAR BELT 30”
Replaceable Collar Belt:
COLLAR BELT 30'' H2O/EDT/EZT/ST/CDT/RH/RH2
NOTE: Standard collar is around 25", this is a longer 30" replacement collar.
$31.00
COLLAR BELT BEEPER
Replaceable Collar Belt:
COLLAR BELT BLACK H2O/EZT/ST/SPT2400/RH/RH2/RAPT1450
** NOTE: Soldering is required.
[porto_block name="dt-related-products-micro-idt"]
$44.00
CONTACTS
Replacement Contact Points:
CONTACT Points, 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450
** NOTE: Washer are required with these contacts.
** STANDARD contacts are 1/2" non insulated.
[porto_block name="dt-related-products-micro-idt"]
$8.00
CONTACTS INSULATED MALE
Replacement Contact Points:
V2 CONTACT Points (3/4") 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450
[porto_block name="dt-related-products-micro-idt"]
$8.00
DUMMY COLLAR
This is a non-working dummy collar for the EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2.
NOTE: Dummy unit only, NON-Working.
$30.00
LANYARD
Neck LANYARD Fits most DT Systems handheld remote/transmitters:
H2O/SPT/CDT/RH/RH2
$5.00
SOUND CONTROL CAPS
BEEPER SOUND CONTROL CAPS
Caps to fit DT Beeper Models:
BTB Series, H20 1850, SPT 2430 & 2432, RAPT 1450, RH Beeper
NOTE: Beeper caps are meant for training purposes (to reduce the beeper noise when you do not need full volume). If using the caps in the field, and/or while hunting be sure to attach the cap with some electrical tape or another secure method thereof to keep the cap secure.
$3.00
TEST LIGHT
TEST LIGHT For the following units:
H2O/SPT/EZT/EDT/ST/CDT/RH/RH2/RAPT 1450
$5.00
WASHERS
RX WASHER EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2/RAPT1450
$1.00
