• ANTENNA 2″ / 4″ / 6″

    Transmitter Antenna for: - H2O Series - SPT Series - EZT Series - EDT Series - ST Series Will also fit other DT models, Micro iDT, SPOT, MR 1100, RAPT series. [porto_block name=""]
    $19.00
  • BATTERY (COLLAR)

    Replacement rechargeable NiMH collar battery for the H2O, RAPT 1450, SPT2400, BTB, EDT, EZT, ST PRO, CDT, RH, RH2 units. [porto_block name=""]
    $31.00
  • BATTERY (TRANSMITTER)

    This is the replaceable RECHARGEABLE NiMH rechargeable battery for the transmitter for the EZT/EDT/RH 1200 & 1220 and CDT series systems. [porto_block name="dt-related-products-micro-idt"]
    $31.00
  • CHARGER (AUTO)

    Standard Battery Charger Auto IMPORTANT:  Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). All series require a special single-jack, double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately). [porto_block name="dt-related-products-micro-idt"]
    $20.00
  • CHARGER (EURO)

    12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series   IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely
    $30.00
  • CHARGER (USA)

    115VAC Standard Battery Charger (USA) for: H2O Series / RAPT 1450 series / EZT Series / EDT Series / RH Series / CDT Series/ 77DT Series / 400DT Series IMPORTANT:  Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately).  The H2O series require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately). NOTE: If the charger that came with your unit had a yellow tip (the output end), this charger will not be compatible with your unit and cables.  This charger is for units that came with completely black chargers.  Please click here to be directed to the correct charger. [porto_block name="dt-related-products-micro-idt"]
    $30.00
  • CHARGER (USA) 12V

    12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series   IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely black charger, your splitter cables will not work with this unit.   [porto_block name=""]
    $35.00
  • CHARGING PORT COVER RX

    BATTERY CHARGING TERMINAL COVER for COLLAR box.  Fits the below models: H2O/EDT/EZT/ST/SPT2400/CDT/RH/RH2/RAPT1450 NOTE: May fit others depending upon application. [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • CHARGING PORT COVER TX

    BATTERY CHARGING TERMINAL COVER for Transmitter/Remote.  Fits the below models: EZT/EDT/RH/CDT NOTE: May fit others depending upon application. [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • COLLAR BELT

    Replaceable Collar Belt: COLLAR BELT H2O/EDT/EZT/ST/SPT 2400/CDT/RH/RH2  
    $31.00
  • COLLAR BELT 30”

    Replaceable Collar Belt: COLLAR BELT 30'' H2O/EDT/EZT/ST/CDT/RH/RH2 NOTE: Standard collar is around 25", this is a longer 30" replacement collar.
    $31.00
  • CONTACTS

    Replacement Contact Points: CONTACT Points,  1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 ** NOTE: Washer are required with these contacts.   ** STANDARD contacts are 1/2" non insulated. [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • CONTACTS INSULATED MALE

    Replacement Contact Points: V2 CONTACT Points (3/4") 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • DUMMY COLLAR

    This is a non-working dummy collar for the EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2. NOTE: Dummy unit only, NON-Working.
    $30.00
  • HOLSTER (HARDSHELL)

    HOLSTER (HARDSHELL) EZT/CDT/EDT/RH Plastic (Kydex) style holster that fits the EZT/CDT/EDT/RH Transmitter/Remotes. [porto_block name="dt-related-products-micro-idt"]
    $39.99
  • JACK CABLE (BLACK)

    NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger Splitter Cable for: RAPT 1450/EDT/EZT/ST/RH/CDT Series/77DT/400DT Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the EDT/EZT/ST/RH/CDT Series ONLY. CHARGER SOLD SEPARATELY. IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). [porto_block name="dt-related-products-micro-idt"]
    $12.00
  • LANYARD

    Neck LANYARD Fits most DT Systems handheld remote/transmitters: H2O/SPT/CDT/RH/RH2
    $5.00
  • TEST LIGHT

    TEST LIGHT For the following units: H2O/SPT/EZT/EDT/ST/CDT/RH/RH2/RAPT 1450
    $5.00
  • WASHERS

    RX WASHER EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2/RAPT1450
    $1.00
  • ZIP CORD RETRACTOR

    DT TRANSMITTER - REMOTE ZIP CORD RETRACTOR Zip Cord Retractor (with keychain style connection) that fits all of the DT Systems Transmitter/Remote units. [porto_block name="dt-related-products-micro-idt"]
    $19.99

paw