• ANTENNA 2″ / 4″ / 6″

    Transmitter Antenna for: - H2O Series - SPT Series - EZT Series - EDT Series - ST Series Will also fit other DT models, Micro iDT, SPOT, MR 1100, RAPT series. [porto_block name=""]
    $19.00
  • BATTERY (COLLAR)

    Replacement rechargeable NiMH collar battery for the H2O, RAPT 1450, SPT2400, BTB, EDT, EZT, ST PRO, CDT, RH, RH2 units. [porto_block name=""]
    $31.00
  • BATTERY (TRANSMITTER)

    Replaceable NiMH TRANSMITTER battery: This is the SPT 2400 Series replaceable NiMH Transmitter battery. [porto_block name=""]
    $31.00
  • CARRYING CASE CLIP

    CARRYING CASE CLIP [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • CARRYING CASE SPT2420

    CARRYING CASE SPT Plastic Carrying case with handle and clip latches for SPT242 [porto_block name="dt-related-products-micro-idt"]
    $25.00
  • CARRYING CASE SPT2430

    CARRYING CASE SPT Plastic Carrying case with handle and clip latches for SPT2430 [porto_block name="dt-related-products-micro-idt"]
    $25.00
  • CHARGER (AUTO)

    Standard Battery Charger Auto IMPORTANT:  Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). All series require a special single-jack, double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately). [porto_block name="dt-related-products-micro-idt"]
    $20.00
  • CHARGER (EURO)

    220VAC European Battery Charger (USA) for: IDT Series / RAPT Series / 1125DT IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).  IDT/RAPT/1125 require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collars charging receptacle (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely black charger, your splitter cables will not work with this unit. [porto_block name="dt-related-products-micro-idt"]
    $30.00
  • CHARGER (USA)

    115VAC Standard Battery Charger (USA) for: IDT Series / RAPT Series / 1125 No Bark/ SPT2400/ RH Pro 1000/ SPOT Series IMPORTANT:  A single jack cable is required to charge the IDT/RAPT/1125/RH Pro collars with this charger.  Splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately).  The SPT 2400 series require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately). NOTE: If the charger that came with your unit had a yellow tip (the output end), this charger will not be compatible with your  cables.  This charger is for units that came with completely black chargers.  Please click here to be directed to the correct charger. [porto_block name="dt-related-products-micro-idt"]
    $25.00
  • CHARGER (USA) 12V

    12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series   IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely black charger, your splitter cables will not work with this unit.   [porto_block name=""]
    $35.00
  • CHARGING PORT COVER RX

    BATTERY CHARGING TERMINAL COVER for COLLAR box.  Fits the below models: H2O/EDT/EZT/ST/SPT2400/CDT/RH/RH2/RAPT1450 NOTE: May fit others depending upon application. [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • COLLAR BELT

    Replaceable Collar Belt: COLLAR BELT H2O/EDT/EZT/ST/SPT 2400/CDT/RH/RH2  
    $31.00
  • COLLAR BELT 30”

    Replaceable Collar Belt: COLLAR BELT 30'' H2O/EDT/EZT/ST/CDT/RH/RH2 NOTE: Standard collar is around 25", this is a longer 30" replacement collar.
    $31.00
  • COLLAR BELT BEEPER

    Replaceable Collar Belt: COLLAR BELT BLACK H2O/EZT/ST/SPT2400/RH/RH2/RAPT1450 ** NOTE:  Soldering is required. [porto_block name="dt-related-products-micro-idt"]
    $44.00
  • CONTACTS

    Replacement Contact Points: CONTACT Points,  1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 ** NOTE: Washer are required with these contacts.   ** STANDARD contacts are 1/2" non insulated. [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • CONTACTS INSULATED MALE

    Replacement Contact Points: V2 CONTACT Points (3/4") 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • DUMMY COLLAR

    This is a non-working dummy collar for the EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2. NOTE: Dummy unit only, NON-Working.
    $30.00
  • HOLSTER (HARDSHELL)

    HOLSTER (HARDSHELL) SPT2400 Plastic (Kydex) style holster that fits the SPT 2400 Transmitter/Remote. [porto_block name="dt-related-products-micro-idt"]
    $49.99
  • HOLSTER (LEATHER)

    HOLSTER (LEATHER) SPT 2400 Leather Holster that fits all of the DT SPT 2400 Transmitter/Remote units. [porto_block name="dt-related-products-micro-idt"]
    $42.99
  • JACK CABLE (BLACK)

    NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger Splitter Cable for: H2O/SPT2400/ RH2  Series Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the H2O/SPT2400/RH2 Series ONLY. CHARGER SOLD SEPARATELY. **PLEASE NOTE:  There are 2 different types of splitter cables.  Please pay attention to the color on the output end of your charger  (Yellow or Black). This splitter will only fit on black end chargers. IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). [porto_block name="dt-related-products-micro-idt"]
    $12.00
  • JACK CABLE (YELLOW)

    NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger Splitter Cable for: H2O / SPT2400 Series / RH2 Series Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the H2O/SPT2400/RH2 Series ONLY. CHARGER SOLD SEPARATELY. **PLEASE NOTE:  There are 2 different types of splitter cables.  Please pay attention to the color on the output end of your charger  (Yellow or Black). This splitter will only fit on yellow end chargers. IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s). [porto_block name="dt-related-products-micro-idt"]
    $12.00
  • LANYARD

    Neck LANYARD Fits most DT Systems handheld remote/transmitters: H2O/SPT/CDT/RH/RH2
    $5.00
  • SOUND CONTROL CAPS

    BEEPER SOUND CONTROL CAPS Caps to fit DT Beeper Models: BTB Series, H20 1850, SPT 2430 & 2432, RAPT 1450, RH Beeper NOTE: Beeper caps are meant for training purposes (to reduce the beeper noise when you do not need full volume). If using the caps in the field, and/or while hunting be sure to attach the cap with some electrical tape or another secure method thereof to keep the cap secure.
    $3.00
  • TEST LIGHT

    TEST LIGHT For the following units: H2O/SPT/EZT/EDT/ST/CDT/RH/RH2/RAPT 1450
    $5.00
  • TEST LIGHT INSULATED

    (Insulated Wires) TEST LIGHT for the following units: DD700 / H2O entire series/SPT Entire Series
    $5.00
  • WASHERS

    RX WASHER EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2/RAPT1450
    $1.00
  • ZIP CORD RETRACTOR

    DT TRANSMITTER - REMOTE ZIP CORD RETRACTOR Zip Cord Retractor (with keychain style connection) that fits all of the DT Systems Transmitter/Remote units. [porto_block name="dt-related-products-micro-idt"]
    $19.99

paw