• ANTENNA 2″ / 4″ / 6″

    Transmitter Antenna for: - H2O Series - SPT Series - EZT Series - EDT Series - ST Series Will also fit other DT models, Micro iDT, SPOT, MR 1100, RAPT series. [porto_block name=""]
    $19.00
  • BATTERY (COLLAR)

    Replacement rechargeable NiMH collar battery for the H2O, RAPT 1450, SPT2400, BTB, EDT, EZT, ST PRO, CDT, RH, RH2 units. [porto_block name=""]
    $31.00
  • BATTERY (TRANSMITTER)

    Replaceable NiMH TRANSMITTER battery: This is the H2O (1800, 1810, 1820, 1830, 1850) replaceable NiMH Transmitter battery. [porto_block name=""]
    $31.00
  • CARRYING CASE H2O

    CARRYING CASE H2O Plastic Carrying case with handle and clip latches for H20 1800 Series Units. [porto_block name="dt-related-products-micro-idt"]
    $25.00
  • CHARGER (EURO)

    12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series   IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely
    $30.00
  • CHARGER (USA)

    115VAC Standard Battery Charger (USA) for: H2O Series / RAPT 1450 series / EZT Series / EDT Series / RH Series / CDT Series/ 77DT Series / 400DT Series IMPORTANT:  Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately).  The H2O series require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately). NOTE: If the charger that came with your unit had a yellow tip (the output end), this charger will not be compatible with your unit and cables.  This charger is for units that came with completely black chargers.  Please click here to be directed to the correct charger. [porto_block name="dt-related-products-micro-idt"]
    $30.00
  • CHARGER (USA) 12V

    12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series   IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). NOTE:  This charger is compatible with units that came with the same charger (Yellow Ends).  If your unit came with a completely black charger, your splitter cables will not work with this unit.   [porto_block name=""]
    $35.00
  • CHARGING PORT COVER RX

    BATTERY CHARGING TERMINAL COVER for COLLAR box.  Fits the below models: H2O/EDT/EZT/ST/SPT2400/CDT/RH/RH2/RAPT1450 NOTE: May fit others depending upon application. [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • CHARGING PORT COVER TX

    BATTERY CHARGING TERMINAL COVER for Transmitter/Remote.  Fits the below models: H2O 1810, 1820, 1830, 1850 NOTE: May fit others depending upon application. [porto_block name="dt-related-products-micro-idt"]
    $2.00
  • COLLAR BELT

    Replaceable Collar Belt: COLLAR BELT H2O/EDT/EZT/ST/SPT 2400/CDT/RH/RH2  
    $31.00
  • COLLAR BELT 30”

    Replaceable Collar Belt: COLLAR BELT 30'' H2O/EDT/EZT/ST/CDT/RH/RH2 NOTE: Standard collar is around 25", this is a longer 30" replacement collar.
    $31.00
  • CONTACTS

    Replacement Contact Points: CONTACT Points,  1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 ** NOTE: Washer are required with these contacts.   ** STANDARD contacts are 1/2" non insulated. [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • CONTACTS INSULATED MALE

    Replacement Contact Points: V2 CONTACT Points (3/4") 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450 [porto_block name="dt-related-products-micro-idt"]
    $8.00
  • DUMMY COLLAR

    This is a non-working dummy collar for the EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2. NOTE: Dummy unit only, NON-Working.
    $30.00
  • JACK CABLE (BLACK)

    NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger Splitter Cable for: H2O/SPT2400/ RH2  Series Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the H2O/SPT2400/RH2 Series ONLY. CHARGER SOLD SEPARATELY. **PLEASE NOTE:  There are 2 different types of splitter cables.  Please pay attention to the color on the output end of your charger  (Yellow or Black). This splitter will only fit on black end chargers. IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately). [porto_block name="dt-related-products-micro-idt"]
    $12.00
  • JACK CABLE (YELLOW)

    NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger Splitter Cable for: H2O / SPT2400 Series / RH2 Series Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the H2O/SPT2400/RH2 Series ONLY. CHARGER SOLD SEPARATELY. **PLEASE NOTE:  There are 2 different types of splitter cables.  Please pay attention to the color on the output end of your charger  (Yellow or Black). This splitter will only fit on yellow end chargers. IMPORTANT:  Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s). [porto_block name="dt-related-products-micro-idt"]
    $12.00
  • LANYARD

    Neck LANYARD Fits most DT Systems handheld remote/transmitters: H2O/SPT/CDT/RH/RH2
    $5.00
  • TEST LIGHT

    TEST LIGHT For the following units: H2O/SPT/EZT/EDT/ST/CDT/RH/RH2/RAPT 1450
    $5.00
  • TEST LIGHT INSULATED

    (Insulated Wires) TEST LIGHT for the following units: DD700 / H2O entire series/SPT Entire Series
    $5.00
  • WASHERS

    RX WASHER EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2/RAPT1450
    $1.00

paw