ANTENNA 1″
Transmitter antenna: Standard for the DD700 and the RAPT 1450 Upland, will also fit the Micro-iDT, Bird Launcher transmitter, RAPT 1400, H20, Master Retriever 1100 (standard), RH PRO, SPOT, PA-300, RT 500, CC 360. Provides a more compact shorter 1" antenna option.
[porto_block name=""]
$24.00
ANTENNA 2.5″
Standard Antenna (2 1/2") for the:
Micro-iDT, SPOT, and Bird Launcher transmitters as well as for the RAPT 1400 and 1450 lines & the PA 300, RH 360 and CC 360.
Will also fit other DT models, H20, SPOT, MR 1100, RAPT series.
[porto_block name=""]
$19.00
BATTERY (COLLAR)
Replacement rechargeable NiMH collar battery for the H2O, RAPT 1450, SPT2400, BTB, EDT, EZT, ST PRO, CDT, RH, RH2 units.
[porto_block name=""]
$31.00
BATTERY COVER TX
Transmitter BATTERY COVER fits the following models:
RAPT 1400/RAPT 1450
[porto_block name="dt-related-products-micro-idt"]
$2.50 – $5.00
CHARGER (AUTO)
Standard Battery Charger Auto
IMPORTANT: Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). All series require a special single-jack, double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$20.00
CHARGER (USA)
115VAC Standard Battery Charger (USA) for:
H2O Series / RAPT 1450 series / EZT Series / EDT Series / RH Series / CDT Series/ 77DT Series / 400DT Series
IMPORTANT: Double-jack and triple-jack splitter cables are required for simultaneous charging of transmitter and collar unit(s) (sold separately). The H2O series require a special double-jack, or triple-jack adaptor/splitter cable for proper fitment to collar or transmitter charging receptacle (sold separately).
NOTE: If the charger that came with your unit had a yellow tip (the output end), this charger will not be compatible with your unit and cables. This charger is for units that came with completely black chargers. Please click here to be directed to the correct charger.
[porto_block name="dt-related-products-micro-idt"]
$30.00
CHARGER (USA) 12V
12v Standard Battery Charger (USA) for IDT Series/ MR1100 Series/ IDT Series/ H2O Series/ SPT2400 Series/ 1125DT/ RH2 Series/ RH Pro Series
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).
NOTE: This charger is compatible with units that came with the same charger (Yellow Ends). If your unit came with a completely black charger, your splitter cables will not work with this unit.
[porto_block name=""]
$35.00
CHARGING PORT COVER RX
BATTERY CHARGING TERMINAL COVER for COLLAR box. Fits the below models:
H2O/EDT/EZT/ST/SPT2400/CDT/RH/RH2/RAPT1450
NOTE: May fit others depending upon application.
[porto_block name="dt-related-products-micro-idt"]
$2.00
COLLAR BELT BEEPER
Replaceable Collar Belt:
COLLAR BELT BLACK H2O/EZT/ST/SPT2400/RH/RH2/RAPT1450
** NOTE: Soldering is required.
[porto_block name="dt-related-products-micro-idt"]
$44.00
CONTACTS
Replacement Contact Points:
CONTACT Points, 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450
** NOTE: Washer are required with these contacts.
** STANDARD contacts are 1/2" non insulated.
[porto_block name="dt-related-products-micro-idt"]
$8.00
CONTACTS INSULATED MALE
Replacement Contact Points:
V2 CONTACT Points (3/4") 1 set of 2 fits: H2O/EDT/EZT/ST/PA/SPT2400/CDT/RH/RH2/RAPT1450
[porto_block name="dt-related-products-micro-idt"]
$8.00
JACK CABLE (BLACK)
NOTE: This product is needed to charge Collar and/or Transmitter in addition to the plug in Charger
Splitter Cable for:
RAPT 1450/EDT/EZT/ST/RH/CDT Series/77DT/400DT
Splitter cable allows simultaneous charging of transmitter and collar unit, specifically for the EDT/EZT/ST/RH/CDT Series ONLY.
CHARGER SOLD SEPARATELY.
IMPORTANT: Double-jack and triple-jack splitter cables required for simultaneous charging multiple collar unit(s) (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$12.00
JACK CABLE (YELLOW)
NOTE: This product is needed to charge Collar in addition to the plug in Charger
Single Jack Cable for:
RAPT 1450 Upland Beeper
BTB Beeper Collars
Single-jack splitter cable allows charging of one collar unit, specifically for the RAPT 1450 and BTB.
CHARGER SOLD SEPARATELY.
**PLEASE NOTE: There are 2 different types of splitter cables. Please pay attention to the color on the output end of your charger (Yellow or Black). This splitter will only fit on yellow end chargers. The black end charger will not need a single jack cable.
IMPORTANT: Double-jack cables required for simultaneous charging multiple collar unit(s) (sold separately).
[porto_block name="dt-related-products-micro-idt"]
$12.00
LANYARD
Neck LANYARD Fits most DT Systems handheld remote/transmitters:
IDT/BTB/BL/RT/SPOT/PA/RDL/RAPT/CC360
[porto_block name="dt-related-products-micro-idt"]
$5.00
LANYARD – WRIST
LANYARD (Small) WRIST Style RAPT:
Fits most RAPT Series of hand held remote/transmitters.
[porto_block name="dt-related-products-micro-idt"]
$5.00
SOUND CONTROL CAPS
BEEPER SOUND CONTROL CAPS
Caps to fit DT Beeper Models:
BTB Series, H20 1850, SPT 2430 & 2432, RAPT 1450, RH Beeper
NOTE: Beeper caps are meant for training purposes (to reduce the beeper noise when you do not need full volume). If using the caps in the field, and/or while hunting be sure to attach the cap with some electrical tape or another secure method thereof to keep the cap secure.
$3.00
TEST LIGHT
TEST LIGHT For the following units:
H2O/SPT/EZT/EDT/ST/CDT/RH/RH2/RAPT 1450
$5.00
TEST LIGHT INSULATED
(Insulated Wires) TEST LIGHT for the following units:
DD700 / H2O entire series/SPT Entire Series
$5.00
TX STRAP RAPT
Neoprene padded WRIST Style RAPT Strap:
Fits most RAPT Series of hand held remote/transmitters. NOTE: This is the large hand strap that goes on the back of the RAPT Series transmitter/remotes.
$12.00
WASHERS
RX WASHER EDT/EZT/ST/H2O/SPT2400/CDT/RH/RH2/RAPT1450
$1.00
ZIP CORD RETRACTOR
DT TRANSMITTER - REMOTE ZIP CORD RETRACTOR
Zip Cord Retractor (with keychain style connection) that fits all of the DT Systems Transmitter/Remote units.
[porto_block name="dt-related-products-micro-idt"]
$19.99
